Career Insights
Hiring7 min read

OSHA 30 vs OSHA 10: What the Cards Mean for EHS Jobs

"OSHA 10 or OSHA 30 required" is a common line in EHS job postings. The cards are familiar, but they are also widely misunderstood. Many people call them certifications, assume they expire, or treat the 30-hour card as a safety credential on par with a board certification. This guide explains what the two courses are, who each one is meant for, what the hours actually cover, when an employer or a state can require them, and how they compare with professional credentials. Program rules are taken from OSHA's own Outreach Training Program pages and procedures as of November 2026. Rules change, so confirm details with OSHA or your trainer before you enroll.

By EHS.now Editorial Team

What OSHA 10 and OSHA 30 actually are

Both cards come from OSHA's Outreach Training Program. OSHA describes it as a voluntary program that trains workers on recognizing and preventing common job hazards. When you finish a class, an OSHA-authorized trainer or an OSHA-accepted online provider issues a 10-hour or 30-hour course completion card. The program has separate tracks for construction, general industry and maritime, plus a disaster site worker track with different course lengths.

The most important point for your resume: the card is a record of completed training, not a credential. OSHA states that none of the Outreach courses is considered a certification, and its program requirements say the program must not be advertised as one. OSHA also notes that the program does not satisfy an employer's training duties under specific OSHA standards. Taking a 30-hour class does not, for example, make you trained for every task covered by a standard that has its own training rule.

OSHA 10 vs OSHA 30: who each course is for

OSHA draws the line by role. The 10-hour class is meant to give workers awareness of common job-related safety and health hazards. The 30-hour class is described as more appropriate for supervisors or workers with some safety responsibility. That difference in audience is the real answer to "OSHA 30 vs OSHA 10." The 30-hour course goes deeper into the same hazard areas and adds topics about managing safety on a site.

OSHA's construction procedures, revised July 1, 2024, show how the hours are split:

  • 10-hour construction: 6 required hours (1 hour Introduction to OSHA, 4 hours on the Focus Four hazards, 30 minutes on personal protective equipment, 30 minutes on health hazards), 2 elective hours covering at least two topics, and 2 optional hours.
  • 30-hour construction: 14 required hours (Introduction to OSHA, 2 hours of Managing Safety and Health, 6 hours on the Focus Four hazards, 2 hours each on PPE and health hazards, 1 hour on stairways and ladders), 12 elective hours covering at least six topics, and 4 optional hours.
  • The Focus Four hazards are falls, electrocution, struck-by and caught-in or between. Falls get at least 1 hour and 30 minutes in both courses.

Program rules that affect how you take the course

A few program rules explain why legitimate classes look the way they do and help you spot offers that do not fit the program. These are from OSHA's program requirements and FAQs:

  • Training is capped at 7.5 contact hours per day, so a 10-hour class takes at least two calendar days and a 30-hour class at least four.
  • OSHA does not run online Outreach classes itself. Online classes come only from independent providers on OSHA's accepted list, and individual trainers may not run self-paced remote classes.
  • Trainers must issue cards within 90 calendar days of the course end date and keep class records for five years.
  • OSHA does not keep student records, does not verify individual cards and does not run a national lookup database. Questions and replacements go to the trainer or provider who taught the class.
  • A replacement card is possible only if the class was taken within the last five years, and only one replacement is allowed per student per class. Trainers may charge an administrative fee.
  • Construction, general industry, maritime and disaster site cards have no expiration date under the federal program.
  • You can move from a 10-hour to a 30-hour class with the same trainer if all training is finished within six months; the 10-hour card is returned.

When OSHA 10 or OSHA 30 is required

Federal OSHA does not require Outreach training. Requirements come from somewhere else: some states, cities, unions and employers make a card a condition of work. OSHA leaves it to the organization that sets the requirement to decide what it accepts. That is why the same card can be optional at one employer and mandatory on a project across the state line.

Two examples show how much local rules vary. In Nevada, the state's consultation and training service explains that a law in effect since January 1, 2010 requires people engaged in construction work, including those who supervise it, to hold an OSHA 10 or 30 hour construction card. It also says that since June 10, 2015 the card does not expire for working on a Nevada construction site. In New York City, the Department of Buildings requires Site Safety Training cards for workers on many larger job sites. A worker card needs at least 40 hours of training, and a 30-hour OSHA class counts as 30 of those hours, while a 10-hour class counts as 10. A supervisor card needs at least 62 hours, and the DOB lists the 30-hour class, not the 10-hour, toward it. NYC also changed its program in 2026, so check the DOB pages directly before you plan training there.

If you work in another state, check your state's labor or safety agency and the project's contract documents rather than assuming the federal rule applies.

How hiring managers read the cards

In practice, the card a posting asks for tells you something about the job. A posting that asks for OSHA 10 usually describes a hands-on role where the employer wants a baseline of hazard awareness. A posting for a safety coordinator, site safety lead or field supervisor that asks for OSHA 30 is signaling that you will be expected to spot hazards for others, run toolbox talks and explain hazard controls to crews and subcontractors.

Match the card to the industry. A construction 30-hour card fits a construction or contractor role. For a plant, warehouse or healthcare setting, the general industry course is the closer match. If a posting does not say which track, the work it describes usually makes it clear.

On your resume, list the card under training, not certifications, with the track and the year you completed it, for example "OSHA 30-Hour Construction, 2025." Keep the card itself or a copy, because the employer cannot confirm it with OSHA and will rely on you and your trainer. Listing it as a certification can look careless to a reviewer who knows the program.

OSHA 30 vs a professional safety credential

A 30-hour card is often the first safety training on an EHS resume, but it is a different kind of thing from a professional credential. A credential such as the Construction Health and Safety Technician (CHST) from the Board of Certified Safety Professionals has eligibility rules, an exam and ongoing maintenance. As of November 2026, BCSP lists three years of construction safety experience as a CHST requirement, a computer-based exam at Pearson test centers, and recertification points every five years plus an annual renewal fee. Confirm current requirements with BCSP before you apply.

The two work together rather than competing. Outreach training is a quick way to meet a site or employer requirement and learn the vocabulary of common hazards. A board credential shows tested knowledge and sustained experience, and it is what more senior safety roles tend to ask for. If you are early in an EHS career, the usual path is the card first, then experience, then a credential that fits your industry.

Choosing between OSHA 10 and OSHA 30

If a job or site names the card, take that one in the track it names. If you are choosing on your own, ask what you want the training to support:

  • Take OSHA 10 if you are a worker who needs baseline hazard awareness or a site requires it for entry.
  • Take OSHA 30 if you supervise others, carry safety duties or are aiming for a safety coordinator or specialist role.
  • Pick the construction track for construction work and the general industry track for most other workplaces.
  • Use only OSHA-authorized trainers or providers on OSHA's accepted online list, and keep your card safe, since replacement is limited.

Sources

Take the next step

Put your career research to work.

Explore focused opportunities or preview an EHS job alert.

Related Career Insights

EHS Leadership6 min read

What Is an EHS Manager? Role, Salary and Career Path

An EHS manager runs the system that keeps people safe and operations compliant, mostly by leading others. Here is how the role differs by scope, what BLS May 2025 data can and cannot tell you about pay, and the path to director.

Read article
Salary & Compensation5 min read

Industrial Hygienist Salary: Public Data and Pay Drivers

BLS does not publish a separate wage for industrial hygienists. Here is the federal occupation that covers them, what its May 2025 pay data shows, and how industry, the CIH and job scope shape an offer.

Read article